Home / Products / Zirconia Alumina / 40% Zirconia Alumina for Coated Abrasives
It is the Fused Alumina-Zirconia type of eutectic composition produced by melting alumina and Zirconia at about 2000C temperature in an electric arc furnace followed by cooling of the motion product.
It is the Fused Alumina-Zirconia type of eutectic composition produced by melting alumina and Zirconia at about 2000C temperature in an electric arc furnace followed by cooling of the motion product.
The very fine and homogenous microstructure of this materials provides high toughness but also excellent self sharpening properties. With 40% zirconia, this product promises lasting durability for coated and bonded abrasives.
ZA28 is for coated abrasives. While traditional abrasives dull or break at the bonding point, DOMILL’s ZA28 abrasives have unique fracture properties that offer microscopic precision in performance and efficient ability in high speed cutting action. These grains do not only improve the overall cutting experience, but they also extend the usability of your sandpapers, belts, or flap discs.
GRITS AVAILABLE:P20-P220
Customized sizes available upon request
Al2O3 | ZrO2 | SiO2 | Fe2O3 | Na2O |
59 | 40 | 0.1 | 0.2 | 0.08 |
Please fill out the form.We will reply you in 24 hours.