Pink Alluvial Garnet

DOMILL Pink Alluvial Garnet is manufactured from inland freshwater placer deposits formed by the natural weathering and water transportation of Almandine garnet minerals. 

1. Product Description

The resulting grains feature a distinctive natural pinkish-rose hue and a sub-angular particle geometry.

 

Origin & Purity Guarantee:This media is strictly NOT sea/beach sand. Originating from inland freshwater placers, it is naturally free from marine salts. Processed through multi-stage freshwater washing and high-intensity magnetic separation, the chloride level is strictly controlled under <25 ppm, complying fully with ISO 11126-10 and SSPC-AB1 specifications to eliminate any risk of flash rusting or osmotic blistering on structural metals.

 

The naturally formed sub-angular particle geometry provides outstanding pneumatic flowability in waterjet feeder systems, minimizing hose abrasion and abrasive feed pulsation while retaining robust cutting performance (85%–90% relative to Red Rock Garnet).

 

For large-scale field blasting (shipyards, storage tanks, pipelines), DOMILL Pink Alluvial Garnet creates a uniform 40–70 μm surface anchor profile with exceptional cost efficiency.

 

(Note: For enclosed blast-room recovery systems requiring 10+ reuses or heavy scale removal, consider upgrading to DOMILL Brown Fused Alumina or White Fused Alumina series.)

 

2. Challenges We Address

Eliminating Sea Sand Chloride Corrosion Risks: Unwashed beach garnets carry high salt content (>100 ppm chloride), inducing flash rust and coating failure. DOMILL Pink Alluvial Garnet is sourced from inland freshwater placers with guaranteed <25 ppm chloride for zero corrosion risk.


Eliminating Feed Pulsation & Hose Bridging: Highly irregular crushed grains can bridge inside feed tubes, causing intermittent grit delivery. Sub-angular pink alluvial grains flow effortlessly through metering valves and delivery hoses for smooth cutting.


Reducing Operational Abrasive Expenditures: Red rock-cut media carries higher cost for high-volume standard waterjet and open-air single-use blasting. Pink alluvial garnet balances strong cutting capability with significantly lower procurement costs.

 

3. Technical Specifications & Chemical Composition

3.1 Physical & Chemical Specifications Table
Classification Property / Element Control Specification / Typical Value Technical Context & Guidance
Physical Spec Appearance / Color Natural Pink / Pinkish-Rose Natural signature color of inland placer garnet
Particle Shape Sub-Angular Natural river-placer weathered shape; superior flowability
Mohs Hardness 7.5 Mohs Solid Almandine hardness for consistent cutting & blasting
Specific Gravity 3.9 -- 4.1 g/cm³ High mass density for effective kinetic impact
Bulk Density 1.9 -- 2.0 g/cm³ Optimized for automatic metering valves and blast pots
Free Silica (SiO₂) <0.5% (Zero Free Silica) Safe worker health compliance, non-toxic
Chloride Content <25 ppm (Freshwater Placer) Inland freshwater origin; zero marine salt risk
Chemical Analysis SiO₂ 36.00% -- 38.00% Naturally bound silicate matrix; no health hazard
Al₂O₃ 20.00% -- 22.00% Structural aluminate providing grain integrity
FeO+Fe₂O₃ 28.00% -- 31.00% Heavy iron element enrichment delivering high density
MgO 5.00% -- 7.00% Natural mineral lattice oxide
CaO 1.00% -- 2.00% Trace component

 

4. Available Mesh Sizes

4.1 Available Mesh Sizes & Applications Table

Mesh Grade Size Range Primary Application Operational Benefit & Cost Advantage
30/60 Mesh 0.25 -- 0.60 mm Field blast cleaning (shipyards, storage tanks) Fast rust removal, creating uniform 50--75 μm profile
60 Mesh 0.25 -- 0.425 mm Medium plate waterjet cutting & heavy maintenance Higher penetrating speed for medium-thick plate sectioning
80 Mesh 0.18 -- 0.30 mm Universal Workhorse Grade for CNC Waterjet Exceptional fluid flowability, high speed, optimal balance
120 Mesh 0.106 -- 0.18 mm Fine-kerf waterjet cutting & coated sandpaper backing Clean edge quality, smooth metering feed without blockage

5. Key Advantages

Natural Pink Color & Ultra-Low Chloride: Signature natural pinkish-rose color sourced from inland river placers. Freshwater washed to chloride, avoiding flash rust and osmotic coating failure associated with sea sand.

 

Sub-Angular Geometry & Superior Flowability: Smooth sub-angular grain shapes reduce friction inside delivery lines, guaranteeing continuous feed without valve clogging.

 

Unmatched Cost-Performance Ratio: Delivers of Red Rock Garnet cutting performance at a highly competitive price point, maximizing profitability for general cutting and open blasting.

 

6. Generational Upgrade & Commercial Selection Guide

In industrial cutting and blasting, select the proper abrasive path based on cost-efficiency, cutting speed requirements, and blast recovery options.


6.1 Commercial Selection & Generational Upgrade Matrix

Application & Operating Condition Recommended Abrasive Selection Rationale & Upgrade Benefit Cost & Efficiency Impact
Universal Waterjet Cutting / Field Blasting DOMILL Pink Alluvial Garnet (80# / 30-60#) Natural Pink Placer Standard Media; smooth feed flow, freshwater low-chloride, highly economical Lowest upfront media purchasing cost for standard sheet cutting and field projects
Extreme Speed / Thick Alloy Waterjet Cutting Upgrade to DOMILL Red Rock Garnet Color & Sharpness Jump; red-colored hard rock crushed facets; cutting speed 15%--20% faster Reduces total machine-hour cost on thick titanium, armor plates, and hard alloys
Enclosed Blast Room / 10+ Reuse Cycles Upgrade to DOMILL Brown Fused Alumina (BFA) Hardness & Toughness Jump (Mohs 9.0 vs 7.5); aggressive cutting; yields 10--15+ recycling passes 50%--100% faster stripping speed; lowers long-term cost per square meter by 40%--60%
Non-Ferrous Blasting / Zero Iron Residue Upgrade to DOMILL White Fused Alumina (WFA) Purity Jump (Al₂O₃ ≥99%); 100% Iron-Free (Garnet contains ≥28% Iron), no rust staining Essential for stainless steel and aluminum substrate contamination prevention

7. Product Applications

1. Universal CNC Waterjet Cutting: Widely utilized for high-volume cutting of carbon steel, stainless steel, glass, and ceramics with stable feed rate and low operating cost.


2. Shipyard, Pipeline & Structural Steel Blasting: Ideal for open-air, single-use abrasive blasting in shipyards, storage tanks, and structural steel, delivering consistent coating adhesion profile.


3. Coated Sandpaper for Wood & Leather Sanding: Natural pink garnet grains are coated onto paper backings for wood sanding and leather polishing, offering cool cutting without scorching fine hardwoods.

Technical Q&A

Q: Is your Pink Alluvial Garnet sea sand due to its pinkish color? How is chloride controlled?

 

A: It is strictly 100% inland placer garnet, NOT sea sand. The pinkish hue is the signature color of weathered inland riverbed Almandine placer deposits. Sea sand carries high marine salts (>100 ppm chloride), causing severe rusting under coatings. DOMILL Pink Alluvial Garnet undergoes multi-stage freshwater washing, maintaining chloride content <25 ppm for guaranteed corrosion safety.

 

Q: Should I choose Pink Alluvial Garnet or Red Rock Garnet for waterjet cutting?

 

A:

 

1. Choose Pink Alluvial Garnet: If you process standard plate thickness (<20 mm steel, glass, stone) and seek high profit margins, Pink Alluvial garnet offers flawless hose flowability at an economical price point.

 

2. Upgrade to Red Rock Garnet: If you cut ultra-thick stock (>30–50 mm), titanium alloys, or armor steel, the fully sharp crushed geometry of Red Rock Garnet yields 15%–20% faster penetration.

Inquiry

Please fill out the form.We will reply you in 24 hours.

  • *
  • *
  • *

Home Tel Mail Inquiry